X-SEAL30 : WATER-BASED ACRYLIC SEALER
X-SEAL30 is a one-component, water-based acrylic sealer designed to protect and enhance concrete surfaces in both interior and exterior environments. It forms a clear, durable film with excellent adhesion and abrasion resistance, providing lasting protection against wear and UV exposure.
Its self-crosslinking, aliphatic formulation prevents yellowing or chalking under sunlight,
ensuring long-term clarity and performance. This low-odor, low-VOC sealer can be easily
sprayed or roller-applied, making it a cost-effective “grind-and-seal” solution for polished or
decorative concrete.
APPLICATIONS
Ideal for: Warehouses and manufacturing facilities, aircraft hangars and garages, retail stores, restaurants and bars, bathrooms and high traffic areas, showrooms and commercial floors, residential and commercial concrete surfaces.
KEY ADVANTAGES
- Water-based, one-part formula (no mixing required)
- Excellent adhesion and abrasion resistance
- Cost-effective grind-and-seal solution
- UV resistant – does not yellow or powder
- Low odor and low VOC content (71 g/L)
- Suitable for indoor and outdoor applications
- Easy application with roller or sprayer.
| Apparence | Liquide blanc laiteux – devient transparent |
| Solids | 28 – 32% |
| Weight per gallon | 8.4 lb |
| VOC content | 71 g/L |
| Viscosity | > 50 cps |
| Coverage | 15 – 20 minutes |
| Dust-free time (72°F / 22°C) | ~ 100 seconds |
| Shelf life | 1 year (sealed container) |
| Storage temperature | 13°C – 29°C / 55°F – 85°F |
| Consistency | Pourable |
| Custom Colors | Available |
| Pouvoir couvrant |
Coverage varies depending on concrete porosity, surface finish, and ambient conditions. Typical applications yield 400–450 ft²/gal (9.8–11 m²/L). Apply in thin, even coats to ensure optimal film formation and increased durability. |
| Application Guidelines | Ensure the surface is clean and dry. Apply with a pump sprayer, then back-roll with a 3/16″ to 1/4″ woven nap roller. Avoid puddles or heavy coats, which can trap air bubbles. Keep the container closed during use. Clean tools immediately after use with acetone or MEK. A second coat can be applied once the surface is dust-free (approximately 15-20 minutes). (Download the technical data sheet for more details). |
| Storage and Safety | Keep tightly closed between 13°C and 29°C (55°F – 85°F). Do not allow to freeze. Keep away from open flames and heat sources. Wear gloves, protective clothing, and eye protection. Keep out of reach of children. |
| Limitations | Do not allow the product to freeze (0°C / 32°F). Avoid thick coats that may trap air bubbles. The surface must be completely dry before application. Do not use below 4°C (40°F) or in excessively humid conditions. |
| Packaging | 19 L pail, environmental compliance meets USGBC LEED® IEQ 4.1 credit requirements. Eco-friendly, low-odor formulation – VOC compliant (71 g/L). |
| First Aid | Eyes: Rinse immediately with clean water for at least 15 minutes. Consult a doctor. Skin: Wash affected areas with soap and water. Inhalation: Remove to fresh air; consult a doctor if irritation persists. Ingestion: Do not induce vomiting. Rinse mouth and drink plenty of water. Consult a doctor. |
Safety Data Sheet (SDS) Available upon request. To obtain the most recent version of the SDS for this product, please contact: info@phxindustries.ca, PHX Industries – 100 Rue Émilien-Marcoux, Blainville (QC) J7C 0B5 ☏ 1-866-430-1331
